How to change the bag refill / liner ring of TOWNEW T Air Lite - TOWNEW Help Center

How to change the bag refill / liner ring of TOWNEW T Air Lite

Make sure you get the correct type of refill ring. For TOWNEW T Air Lite, you'd need T1/T Air Lite Refill Ring.

There are 2 options of bags for TOWNEW T Air Lite, including regular bags and biodegradable bags.
 


How to change the refill ring
When installing the ring, the side with a curve is on the top, while the flat side of the ring is on the bottom

  1. Remove the outer ring
  2. Replace the refill ring
  3. Put the outer ring back
  4. Push the bag to put it into place inside the trash can


    • Related Articles

    • How to change the bag refill / liner ring of TOWNEW T1

      Make sure you get the correct type of refill ring. For TOWNEW T1, you'd need T1/T Air Lite Refill Ring. There are 2 options of bags for TOWNEW T1, including regular bags and biodegradable bags.   Shop TOWNEW T1/T Air Lite Refill Rings     Shop TOWNEW ...
    • How to change the bag refill / liner ring of TOWNEW T3

      Make sure you get the correct type of refill ring. For TOWNEW T3, you'd need T3 Slim Refill Ring.            Shop TOWNEW T3 Slim Refill Rings How to change the refill ring When installing the ring, the side with a curve is on the top, while the flat ...
    • Quick Start Guide for setting up your TOWNEW T Air Lite

      Important Safety Instructions For indoor use only. Charge TOWNEW only with its specified adapter with required safety certificates to avoid fire, electric shock, or personal injury. Do not rinse TOWNEW under the tap or immerse it in water or any ...
    • How to clean TOWNEW T Air Lite

      TOWNEW T Air Lite is water-resistant with an IPX3 rating, so it can only handle water splashes. Therefore, to clean it please use a lightly dampened cloth with or without a cleaning product that's safe for ABS(Acrylonitrile Butadiene Styrene) ...
    • Cannot seal the bag of TOWNEW T Air Lite

      First, please try to check if there's any trash that got jammed on the location of the sealing. If yes, please clean that up, and then try to seal again. If the problem remains, please contact our support team and provide us with the following ...